语音通知 - 代码示例

<%@LANGUAGE="VBSCRIPT" CODEPAGE="936"%>
<%

 '接口类型：互亿无线语音通知接口。
 '账户注册：请通过该地址开通账户https://user.ihuyi.com/new/register.html
 '注意事项：
 '（1）调试期间，请仔细阅读接口文档；
 '（2）请使用APIID（查看APIID请登录用户中心->语音通知->产品总览->APIID）及APIkey来调用接口；
 '（3）该代码仅供接入互亿无线语音通知接口参考使用，客户可根据实际需要自行编写；

Response.Charset = "gb2312"

'

'asp UTF转GB2312   将UTF8编码文字转换为GB编码文字的asp代码
function UTF2GB(UTFStr)
for Dig=1 to len(UTFStr)
   '如果UTF8编码文字以%开头则进行转换
   if mid(UTFStr,Dig,1)="%" then
      'UTF8编码文字大于8则转换为汉字
     if len(UTFStr) >= Dig+8 then
        GBStr=GBStr & ConvChinese(mid(UTFStr,Dig,9))
        Dig=Dig+8
     else
       GBStr=GBStr & mid(UTFStr,Dig,1)
     end if
   else
      GBStr=GBStr & mid(UTFStr,Dig,1)
   end if
next
UTF2GB=GBStr
end function

'GB2312转UTF8的asp代码  将GB编码文字转换为UTF8编码文字
Function toUTF8(szInput)
     Dim wch, uch, szRet
     Dim x
     Dim nAsc, nAsc2, nAsc3
     '如果输入参数为空，则退出函数
     If szInput = "" Then
         toUTF8 = szInput
         Exit Function
     End If
     '开始转换
      For x = 1 To Len(szInput)
         '利用mid函数分拆GB编码文字
         wch = Mid(szInput, x, 1)
         '利用ascW函数返回每一个GB编码文字的Unicode字符代码
         '注：asc函数返回的是ANSI 字符代码，注意区别
         nAsc = AscW(wch)
         If nAsc < 0 Then nAsc = nAsc + 65536
    
         If (nAsc And &HFF80) = 0 Then
             szRet = szRet & wch
         Else
             If (nAsc And &HF000) = 0 Then
                 uch = "%" & Hex(((nAsc \ 2 ^ 6)) Or &HC0) & Hex(nAsc And &H3F Or &H80)
                 szRet = szRet & uch
             Else
                'GB编码文字的Unicode字符代码在0800 - FFFF之间采用三字节模版
                 uch = "%" & Hex((nAsc \ 2 ^ 12) Or &HE0) & "%" & _
                             Hex((nAsc \ 2 ^ 6) And &H3F Or &H80) & "%" & _
                             Hex(nAsc And &H3F Or &H80)
                 szRet = szRet & uch
             End If
         End If
     Next         
     toUTF8 = szRet
End Function

'二进制转换为十六进制的asp代码
function c2to16(x)
    i=1
    for i=1 to len(x) step 4
       c2to16=c2to16 & hex(c2to10(mid(x,i,4)))
    next
end function

'二进制转换为十进制的asp代码
function c2to10(x)
    c2to10=0
    if x="0" then exit function
      i=0
    for i= 0 to len(x) -1
       if mid(x,len(x)-i,1)="1" then c2to10=c2to10+2^(i)
    next
end function

'十六进制转换为二进制的asp代码
function c16to2(x)
     i=0
     for i=1 to len(trim(x))
       tempstr= c10to2(cint(int("&h" & mid(x,i,1))))
       do while len(tempstr)<4
          tempstr="0" & tempstr
       loop
       c16to2=c16to2 & tempstr
    next
end function

function c10to2(x)
    mysign=sgn(x)
    x=abs(x)
    DigS=1
    do
       if x<2^DigS then
         exit do
       else
         DigS=DigS+1
       end if
    loop
    tempnum=x
    i=0
    for i=DigS to 1 step-1
       if tempnum>=2^(i-1) then
          tempnum=tempnum-2^(i-1)
          c10to2=c10to2 & "1"
       else
          c10to2=c10to2 & "0"
       end if
    next
    if mysign=-1 then c10to2="-" & c10to2
end function

'UTF8编码文字将转换为汉字
function ConvChinese(x)
    A=split(mid(x,2),"%")
    i=0
    j=0
   for i=0 to ubound(A)
      A(i)=c16to2(A(i))
   next
   for i=0 to ubound(A)-1
     DigS=instr(A(i),"0")
     Unicode=""
     for j=1 to DigS-1
       if j=1 then
         A(i)=right(A(i),len(A(i))-DigS)
         Unicode=Unicode & A(i)
       else
          i=i+1
          A(i)=right(A(i),len(A(i))-2)
          Unicode=Unicode & A(i)
       end if
     next
     if len(c2to16(Unicode))=4 then
        ConvChinese=ConvChinese & chrw(int("&H" & c2to16(Unicode)))
     else
        ConvChinese=ConvChinese & chr(int("&H" & c2to16(Unicode)))
     end if
   next
end function

'GB2312中文转unicode(&#)的asp代码  将GB编码文字转换为unicode编码文字
function chinese2unicode(Str)
   dim i
   dim Str_one
   dim Str_unicode
   if(isnull(Str)) then
      exit function
   end if
   for i=1 to len(Str)
     Str_one=Mid(Str,i,1)
     Str_unicode=Str_unicode&chr(38)
     Str_unicode=Str_unicode&chr(35)
     Str_unicode=Str_unicode&chr(120)
     Str_unicode=Str_unicode& Hex(ascw(Str_one))
     Str_unicode=Str_unicode&chr(59)
   next
   chinese2unicode=Str_unicode
end function  

'URL地址编码解码函数
Function URLDecode(enStr)
dim deStr
dim c,i,v
deStr=""
for i=1 to len(enStr)
   c=Mid(enStr,i,1)
   if c="%" then
    v=eval("&h"+Mid(enStr,i+1,2))
    if v<128 then
     deStr=deStr&chr(v)
     i=i+2
    else
     if isvalidhex(mid(enstr,i,3)) then
      if isvalidhex(mid(enstr,i+3,3)) then
       v=eval("&h"+Mid(enStr,i+1,2)+Mid(enStr,i+4,2))
       deStr=deStr&chr(v)
       i=i+5
      else
       v=eval("&h"+Mid(enStr,i+1,2)+cstr(hex(asc(Mid(enStr,i+3,1)))))
       deStr=deStr&chr(v)
       i=i+3
      end if
     else
      destr=destr&c
     end if
    end if
   else
    if c="+" then
     deStr=deStr&" "
    else
     deStr=deStr&c
    end if
   end if
next
URLDecode=deStr
end function

'判断是否为有效的十六进制代码
function isvalidhex(str)
dim c
isvalidhex=true
str=ucase(str)
if len(str)<>3 then isvalidhex=false:exit function
if left(str,1)<>"%" then isvalidhex=false:exit function
   c=mid(str,2,1)
if not (((c>="0") and (c<="9")) or ((c>="A") and (c<="Z"))) then isvalidhex=false:exit function
   c=mid(str,3,1)
if not (((c>="0") and (c<="9")) or ((c>="A") and (c<="Z"))) then isvalidhex=false:exit function
end function


Function Post(url,data)
	dim Https
	set Https=server.createobject("MSXML2.XMLHTTP")
	Https.open "POST",url,false
	Https.setRequestHeader "Content-Type","application/x-www-form-urlencoded"
	Https.send data
	if Https.readystate=4 then
		dim objstream
		set objstream = Server.CreateObject("adodb.stream")
		objstream.Type = 1
		objstream.Mode =3
		objstream.Open
		objstream.Write Https.responseBody
		objstream.Position = 0
		objstream.Type = 2
		objstream.Charset = "utf-8"
		Post = objstream.ReadText
		objstream.Close
		set objstream = nothing
		set https=nothing
	end if
End Function


dim target,post_data,content,mobile
mobile = "138xxxxxxxx"	'手机号码
target = "http://api.vm.ihuyi.com/webservice/voice.php?method=Submit"
content = "您的订单号是：0648。已由顺风快递发出，请注意查收。"
post_data = "account=用户名&password=密码&mobile="&mobile&"&content="&content
'用户名是登录用户中心->语音通知->产品总览->APIID
'查看密码请登录用户中心->语音通知->产品总览->APIKEY
tempstr = UTF2GB(Post(target,post_data))
'response.Write(tempstr)

'if instr(tempstr,"提交成功")>0 Then
	'response.Write("true") 
'else
	'response.Write("error") 
'end if

Dim len1,len2
len1 = instr(1,tempstr,"",1)-1
len2 = instr(1,tempstr,"",1)
'response.Write(len2)
code=left(tempstr,len1)
code=right(code,(len1-len2-5))
response.Write(code)

Dim len3,len4
len3 = instr(1,tempstr,"",1)-1
len4 = instr(1,tempstr,"",1)
'response.Write(len2)
msg=left(tempstr,len3)
msg=right(msg,(len3-len4-4))
response.Write(msg)

%>